CONVEYOR BELTS
EP (Polyester) Rubber Conveyor Belt
High-strength polyester-fabric conveyor belting for dependable medium- and long-distance material handling.
PRODUCT OVERVIEW
Designed around demanding operating requirements
EP (Polyester) Rubber Conveyor Belts use a multi-ply polyester-and-nylon fabric carcass bonded with quality rubber covers. This construction provides a practical balance of tensile strength, elasticity, flexibility and stable conveying performance.
They are suitable for transporting bulk and unit materials over medium to long distances, including demanding applications involving heavier loads, moisture and higher operating speeds.
Construction
Polyester canvas is used as the carcass, with polyester in the warp direction and nylon/polyester reinforcement in the weft direction.
Applicable standards
GB/T 7984-2001, DIN 22102, BS 490, AS 1332, RMA, JIS K 6322 and SABS 1173.
Available types
General-purpose, fire-retardant, cold-resistant, wear-resistant, heat-resistant, acid-and-alkali-resistant, oil-resistant, anti-static and other application-specific grades.
APPLICATIONS
Where this product is used
EP (Polyester) Rubber Conveyor Belts are designed for efficient material handling across a wide range of industries. They are suitable for transporting bulk materials over medium to long distances while offering excellent durability and performance.
- Mining and Quarrying
- Cement Plants
- Steel and Metal Industries
- Thermal Power Plants
- Coal Handling Systems
- Sand and Gravel Processing
- Stone Crushing Plants
- Ports and Bulk Material Terminals
- Fertilizer and Chemical Industries
- Recycling Plants
- Agriculture and Grain Handling
- Warehouses and Material Handling Systems
KEY FEATURES
Performance characteristics
Our EP (Polyester) Rubber Conveyor Belts are manufactured using high-quality polyester (warp) and nylon (weft) fabric, ensuring superior strength, flexibility, and long service life.
With the advantages of thin belt with light weight, high tensile strength, fatigue and wear resistance, erosion resistance of water/steam/chemical, good impact resistance, excellent groove formation ability, low elongation, good stability ever heated and long service life, it's the developing trend of fabric conveyor belt. It is mainly used in harsh condition of long distance,heavy-load, high-chemical corrosive etc, it is especially suitable for transporting in moist environment
- High tensile strength for heavy-duty applications.
- Low elongation, reducing the need for frequent belt adjustments.
- Excellent impact resistance and load-carrying capacity.
- Superior wear and abrasion resistance.
- High flexibility for smooth operation over pulleys.
- Excellent adhesion between fabric plies and rubber covers.
- Resistant to moisture, humidity, and weather conditions.
- Good resistance to heat, oil, chemicals, and ageing (depending on cover grade).
- Suitable for medium and long-distance conveying.
- Energy-efficient operation with low maintenance requirements.
- Available in multiple widths, ply ratings, and cover thicknesses.
- Manufactured in accordance with international quality standards.
TECHNICAL SPECIFICATIONS
Reference technical data and available configurations
Reference values are provided for preliminary product selection. Final specifications, tolerances, test methods, applicable standards and certification requirements must be confirmed for the selected grade and stated in the applicable quotation, technical datasheet or Certificate of Analysis (COA).
Reference Technical Specification
| Property | Reference specification |
|---|---|
| Carcass / reinforcement | Polyester warp × polyamide/nylon weft (EP) |
| Nominal strength / rating | Reference belt rating 500 N/mm; range selected by duty |
| Plies | 3 reference; typically 2–6 |
| Width / dimensions | Typical widths 500–2200 mm; custom subject to factory |
| Top / bottom cover | 4+2 mm reference; cover thickness buyer-specified |
| Hardness (cover) | 60 ±5 Shore A reference |
| Cover tensile | ≥20 MPa reference cover |
| Cover elongation | ≥450% reference cover |
| Abrasion loss | ≤150 mm³ reference (general abrasion-resistant cover) |
| Temperature / service | -40 to +70°C reference for general-purpose cover |
Critical Selection Notes
| Critical Selection Notes | State full designation, edge type, roll length, splice allowance, minimum pulley diameter and belt mass. Cover grade must be selected for material handled. |
Information Required for Quotation
| Information Required for Quotation | EP rating (e.g. EP500/3, EP630/4), number of plies, belt width, top/bottom cover thickness, cover grade, belt length/roll length, material conveyed, operating temperature, quantity, edge type, applicable DIN/ISO/customer standard |
Values marked as reference are indicative and may vary by grade, construction and test method. Please share the application and required standard for final confirmation.
INDUSTRIES SERVED
Relevant industrial sectors
Industry references below are taken from the supplied product content.
MiningCementSteelPower GenerationConstructionPorts & LogisticsFertilizerChemical ProcessingAgricultureRecycling
REQUEST A QUOTE
Discuss EP Polyester with Fidelin.
Share specifications, dimensions, quantity and destination.